Panasonic TH-50PX60U 50-Inch Plasma HDTV
June 20th, 2009 | 37 views | Posted by in Cheap HDTVs
Panasonic TH-50PX60U 50-Inch Plasma HDTV
Featuring Panasonic’s 9th generation gas-plasma screen, the Panasonic TH-50PX60U 50-Inch Plasma HDTV features a width-to-height 16:9 aspect ratio similar to movie theater screens, providing a theater-like experience at home. Its maximum of 29 billion colors and over 3,000 shades of gradation provide exceptionally fine detail for outstanding HDTV reproduction.
The set’s built-in ATSC (DTV) tuner pulls HD signals (480p/720p/1080i) right from the airwaves, and its QAM tuner is fully compatible with unscrambled HDTV cable reception. A standard analog NTSC tuner receives standard-definition (SD) programming. It also includes a Secure Digital (SD) memory card slot, enabling you to take an SD card directly from a digital still camera or camcorder and insert it directly into the TV for quick and colorful photo slideshows.
A plasma screen renders vivid colors like you’ve never seen before (as in, up to 29 billion in this case), extremely wide viewing angles (wider, even, than those of most LCD screens), and easy placement due to a plasma monitor’s slim profile–the TH-42PX60U is a mere 3.7 inches deep, one of the slimmest plasmas around–perfect for desk or wall mounting. Brightness tends to be extremely uniform across plasma screens, which are also impervious to the picture distortion and negative color balances that afflict CRT monitors when placed near lighting or sound systems.
The TH-50PX60U features a 1366 x 768-pixel resolution and an amazing contrast ratio of 10000:1. (The higher the contrast ratio, the greater a TV’s ability to display subtle color details and not get washed out by ambient room light.) The 3D Y/C digital comb filter constantly analyzes the three dimensions of picture height, picture width, and picture changes-over-time, to reduce dramatically edge image artifacts while improving transition detail. Other features include V-Chip parental controls, on/off sleep timers, closed-caption decoding, aspect ratio control, and video input labeling.
The TV’s internal stereo speakers are powered by 10 watts per channel (for 20 watts of total power). It features the following connection options:
- Component (Y/Pb/Pr): 2 inputs (with 2 audio inputs)
- HDMI: 2 inputs
- Composite (RCA audio/video): 3 inputs (1 on the front), 1 output
- S-Video: 3 inputs (1 on the front)
HDMI (High-Definition Multimedia Interface) is a lossless, uncompressed, all-digital audio/video interface to link any AV source with an audio and/or video monitor, such as a digital television (DTV). HDMI supports standard-definition (SD), enhanced definition (ED), or high-definition (HD) video, plus multi-channel digital audio–all using a single cable.
If a component doesn’t have an HDMI connection, you’ll also get great picture reproduction using the three-jack component video (Y/Pb/Pr) input, which provides separate connections for luminance (Y), blue color difference (PB) and red color difference (PR). This results in increased bandwidth for color information, resulting in a more accurate picture with clearer color reproduction and less bleeding than you would get with S-Video or composite (RCA yellow video plug) connections. Component video output is available only for DVD playback.
What’s in the Box
Plasma TV, remote control (with batteries), pedestal base, power cord, printed operating instructions
Technical Details
- 52-inch HD-ready plasma TV; measures 47.6 x 32.2 x 3.7 inches (WxHxD)
- Integrated NTSC, ATSC tuners; QAM tuner compatible with unscrambled HDTV cable reception
- 1366 x 768-pixel resolution; 10000:1 contrast ratio; motion adaptive 3D Y/C comb filter
- Connections: 3 composite A/V (1 front), 3 S-Video (1 front), 2 component (Y/Pb/Pr), 2 HDMI, 1 SD memory card slot
- Two stereo speakers, 10 watts apiece (20 watts total); BBE ViVA HD3D virtual surround sound
Panasonic TH-50PX60U 50-Inch Plasma HDTV Review
I would make several other suggestions for your viewing pleasure if you are new to the plasma market as I was. Be sure your HD source is excellent. The plasma you buy will only put out an excellent picture if the incoming signal is of excellent quality. A reliable cable or satellite provider with the proper HD in-home and outside of home equipment and HD service will provide a great HD feed for your plasma. If your cable provider is like mine, be sure to check that your HD cable box is putting out the HD 720P (P for progressive scan) signal that your plasma TV was made to use. Some boxes will default to a 1080i (interlaced) signal which is inferior to the 720P your plasma will support. Check the display on your cable or satellite box if it has one. If it displays anything but 720P, get on the phone with your cable or satellite provider to find out how to make it default to a 720P signal. If you have a DVD player, make sure it is a 720P (progressive) scan HD DVD player and check to make sure the DVD’s you use are also of 720P quality. Anything less and you will be sacrificing picture quality.
Be sure to purchase a decent HDMI (High Definition Multimedia Interface) cable if you plan on using upstream hardware with HDMI outputs to your plasma. A decent HDMI 6′ cable is about $30 on the internet. This too will give you the greatest amount of HD precision from your plasma TV. If your upstream hardware only has a DVI (Digital Video Interface) video output, be sure to purchase a DVI to HDMI cord that has a DVI connector on one end and a HDMI connector on the other. As DVI only supports video signals, you will have to run a separate RCA audio cable from your cable/satellite box for your digital audio signal (for plasma TV or home surround system) or analog audio signal (for a standard stereo). However, this is far superior than taking the easy way out and using a component hook-up instead. Component video cables supply no where near the same video quality that HDMI or DVI do. If your upstream hardware providing the signal to your plasma has neither HDMI or DVI outputs, change that hardware to one(s) that do if you truly want High Definition quality out of your HD plasma.
Also, make sure you purchase the right plasma screen size for the distance you’re going to watch it from. A 65″ screen may be way too large for a 6′ viewing distance. The high definition pixel size for a 65″ screen is much larger than say a pixel from a 42″ screen. If you watch too large an HD screen from your viewing distance, you will see the individual pixels losing the HD effect. A 42″ screen may be too small if your viewing distance is 16′ away. Although the picture quality would be just fine, you probably will have trouble watching it because of its diminished size. Remember, these plasma TV’s have a 16:9 aspect ratio (16″ horizontal for every 9″ vertical) which are nearly twice as wide as they are tall. The good news is that you get great wide screen vision far superior to standard 4:3 (4″ horizontal for every 3″ vertical) aspect ratio TV’s which are only 33% wider as they are tall. The bad news is that you must be VERY concerned about the vertical viewing area. Make absolutely sure you have enough vertical screen viewing area when picking out the right plasma for your viewing distance. I would go so far as to say that paying close attention to the vertical measurement of the plasma may be much more important than consideration of the diagonal measurement, especially if you are accustomed to seeing standard TV with a 4:3 screen aspect ratio size.
Plasma TV’s are great. But be aware they are susceptible to screen burn in from static objects displayed on programming you may watch such as stock tickers, etc. Many HD channels are now using logos that are plasma friendly. But be cautious about this inherent weakness in plasma technology especially vulnerable in the first several hundred hours of use.
One last thing. You just spent big bucks on a plasma TV. Make sure you buy a good AC power surge suppressor to plug your plasma into. It’s not a good idea to buy some cheap $5 plug strip. Purchase something decent, preferably one that has a downstream equipment replacement warranty if it fails. (Better to have THEM replace your plasma TV from a power company power surge than YOU!!!)
You can Buy It! Or see more Reviews of Panasonic TH-50PX60U 50-Inch Plasma HDTV
Related Products
You can follow any responses to this entry through the RSS 2.0 You can leave a response, or trackback.
